Gas Reservoir

Gas Reservoir Banner

Gas Reservoir

A Gas Reservoir has been developed and manufactured for customers' convenience.

According to the regulation the gas pressure to the gas booster must not fall below 10mbar.  Some sites are known to experience issues with transient drops in pressure usually caused by slow reaction time of a gas meter. In such cases we recommend a Gas Reservoir. It is an easy to install part that should solve main issues for gas booster tripping. 


The Gas Reservoir for 576/1 Gas Booster is fitted with:

- 1 x  1/2" BSP female socket side connection for the Low Pressure cut off switch, c/w compression fittings and sensing tube

- A Gas Reservoir is of welded construction prefabricated from BS1387 mild steel tube with weld cap ends

- 1 x  vertical 3/4" BSP female socket top connection for customers to extend and connect to mains gas service on inlet side of booster

All Gas Reservoirs are strengthand tightness tested prior to despatch and painted with one coat of red oxide primer paint.
 
Gas Reservoir
Different sizes are available on request. To find out more please contact us.
   


Installation Recommendations


Gas Reservoir inlet should be connected directly to gas service and not be fitted with isolating valves.

We would recommend the gas reservoir branch connection to be installed downstream of the main booster inlet isolating valve and prior to flanged inlet connection on the gas booster.